How can I be confident that SLX being stiff and low tack will stay in deep channels, especially in cold weather?
When installing on channels, even at room temperature, the film needs to be heated and then applied with pressure to secure it on the channel. With temperature, pressure and time, adhesive will wet up in deep channel and bond strongly to substrate.
When installing on channels, even at room temperature, the film needs to be heated and then applied with pressure to secure it on the channel. The adhesive used in SLX? Cast Wrap, despite its lite contact, does flow and wet out on the to achieve high adhesion. And with any film brand, it has to be installed with the right amount of pressure and post heating to secure it in deep channels.