How to perform a Wall Compatibility Test

 Wall Compatibility Test;

1. Contact your Arlon representative to determine what are the best three (3) possible products for your specific job. The recommendation will depend on the wall surface as well as product criteria. For instance, a three month promotional wall wrap will require a different product than a permanent project.
2. Print a test image using the printer for the actual job. Print at least a 2’ x 2’ size image with the same ink saturation as the real job. You should print samples of each possible media. Samples can be requested by an Arlon Sales Representative.
3. Allow the prints to outgas overnight. Apply laminate if needed.
4. The surface must be completely clean, in good condition, smooth, and dry before final preparation.
5. Apply the vinyl and label each sample clearly and take a photo for visual reference.
6. After dwelling at least overnight or 24 hours, observe for bubbling, edge lifting, curling, or loss of texture conformability. Any sign of edge curl or lifting indicates the product is not compatible.
7. For each sample that passes visual inspection, cut 3” of the print and peel it off the wall. If the sample takes effort to remove, the vinyl and surface are compatible.