Application

Discover expert guidance on the best practices for both product application to ensure seamless and efficient processes.

• Alternative to IPA for vehicle preparation
• Can I use Deversey Oxivir to clean Series 2100 vinyl film?
• Can I use Series 3350 Anti-graffiti Overlaminate for dry-erase applications?
• Can I use Series 3350 Anti-graffiti Overlaminate on textured walls?
• Can I wet apply film with air egress feature (i,e, 6000XRP, 6100XLP, SLX)?
• Can ProTec Series 3960 be used on windows?
• Can series 2100 film cross over to wrapping motorcycle bikes?
• Can you print (digital or screen) on Arlon overlaminates?
• Can you remove the entire liner of SLX when wrapping a race hauler?
• Can you use a matte laminate on a textured surface?
• Can you wrap brake calipers with Arlon reflective films?
• DPF 4600LX Wall Wrap for SGIA 2018 Booth
• DPF 4600LX removal after it was installed for 2 years on box truck
• DPF 6000RP with Series 3220 for Gas pumps Bid in Italy
• Does all car wrap material respond so well to the heat gun? Can I expect wrap material IJ180C-10 by 3M to behave the same as the wrap in this video?
• Does post heating really prevent the film from popping up on stretched areas?
• Does the dual color film work for interior application?
• For color change film, is there a curing time for adhesives before post heating is done?
• Fusion Wrap FAQs
• How can SLX being stiff and low tack stay in deep channels?
• How does SLX/3270 performs in deep channel with and without post heat?
• How does temperature affect tack?
• How long do you wait before wrapping a vehicle that is going to be repainted?
• How to install reflective film on rivets?
• If I paint the drywall, will DPF 6700 or DPF 8000 still damage the wall when removed?
• If I use more pressure with SLX, won?t that result in wrinkles?
• In theory, I use the pre-strech and shrink method shown on the WIR video on almost anything?
• Installation of Cast vinyl in cold weather
• Installing SLX outdoors on a 16-ft box truck
• Is 3310 overlaminate film alcohol resistant? What is the best way to clean 3310?
• Is Arlon reflective film directional
• Nestle Water Trial using SLX for their water delivery trucks
• Nordic Illuminite removal
• Sailboat application
• Should I use a different technique with SLX since it is so low tack?
• What do I use to clean DPF 5200 or etched glass with?
• What does 'glass' mean in wrapping?
• What does it mean for adhesive to wet out?
• What happens if I install IllumiNITE Wrap on rivets with a RollePro?
• What is FLITE Technology? and How Does It Make Wrapping Easier?
• What is the Bridge method?
• What is the Lay-in method?
• What is the Triangle Technique?
• What is the difference of 'pushing' and 'dragging' the squeegee?
• What is the post heating temperature for graphic films?
• What is the proper squeegee angle when applying?
• What is the proper squeegee motion when applying?
• Overlap vs Butt-seaming
• What's the ideal film temperature to install with a RollePro on rivets?
• When to Apply Self-Adhesive Graphics to Paint: Understanding How Different Paints Cure and Their Effects on Adhesive Performance
• When to use a felt edge or a wet edge squeegee?
• Why is post heating important?
• Will SLX stay down on the vehicle even though it feels very low tack?
• Will the FLITE adhesive return to matte if heated after it wets out?
• Wrapping with SLX? Cast Wrap
• Cleaning a Vehicle Before Wrapping
• Fleet Graphics Substrate Preparation
• Surface Preparation
• Application Rule of Thumb for All Graphic Film Installs
• Application Tips for Boats Wraps
• Cold Weather Installation of Container Marking Film
• Digital Printing Installation
• How to Install on Deep Channels - Cut and Drop Method
• How to Install on Deep Channels: Using Inlay Strips with the Cut and Drop Method
• How to Install on Rivets, Roller Methods
• How to Install on Rivets - The Poke/Lance Method
• Installation on Banner, Awning and Flexible Fabrics
• Installation Technique for Channels
• Installations in Very Cold Weather
• Installing Fleet and Vehicle Wrap Films on Painted Tank Trailers
• Mixing Application Fluid
• Pressure Washing Cast Vinyl
• Reducing Bubbles Trapped by Vinyl Film
• Removing Application Tape from Fleet and Vehicle Wrap Films
• Use and Application For Etched Glass Film
• Using Heat and Pressure to Increase Initial Adhesion
• Vehicle Surfaces with Complex Channels
• Vehicle Wrap Tips
• Wet Applications
• Window Glass Application
• Application Tape Removal
• Chemically Assisted Vinyl Film Removal
• Cleaning Guide for DPF 390 and Flexface FX V2
• Fleet & Vehicle Wrap Removal
• Fleet Graphics Post-Care & Cleaning Instructions
• How to Clean Etched Glass Film
• Tips on Cleaning a Wrapped Car
• Vinyl Removal Procedure for Wall Graphics
• Cut Graphic Film Adhesion Build
• 510 Removal over 3MiJ40C
• Can I wet apply graphic films with air-egress?
• What is dry application?
• Can I wet apply 50WD Clear/White which has waterbased adhesive?