---
title: Wet application vs. Dry application
description: Dry vs Wet
---

[Skip to content](https://help.arlon.com/wet-application-vs-dry-application#main-content)

<https://help.arlon.com/kb-tickets/new?hsLang=en>

Open main navigation

Close main navigation

- <https://help.arlon.com/kb-tickets/new>
- [arlon.com](mailto:techservice@arlon.com)

[arlon.com](mailto:techservice@arlon.com)

 HOW CAN WE HELP?

- There are no suggestions because the search field is empty.

1. [Arlon Help Center](https://help.arlon.com/?hsLang=en)
2. [Application](https://help.arlon.com/application?hsLang=en)

# Wet application vs. Dry application

## Wet application vs Dry application

 

**Wet application vs Dry application**

 

There are two ways to install a graphic film on a surface: wet or dry. But what do we mean by each of these methods? Simply put, when we refer to “wet,” we mean the use of application fluids, and when we refer to “dry,” we mean the absence of them. However, there is much more to know about this topic before deciding which technique or material to choose for a specific project.

 

**What is wet application?**

Wet installation is a technique used to apply vinyl graphics by spraying a liquid ‘slip’ solution onto the adhesive before sticking it down. This liquid creates a temporary "slippery" barrier that prevents the adhesive from grabbing the surface instantly.

**Benefits of using it**

- **Repositioning**: Instead of one stressful shot to get it straight, the vinyl "floats" on the liquid. You can slide it around until the alignment is perfect.
- **Zero Bubbles:** Because the space under the vinyl is filled with liquid rather than air, you can squeegee the fluid out to create a perfectly flat, bubble-free finish.
- **Reduced Static:** It kills the static electricity that often attracts dust to the sticky side of the vinyl during installation.

**When to Use It**

This method is ideal for:

- **Large Graphics:** Any decal too big to handle easily by yourself.
- **Smooth Surfaces:** Best for signs, metal panels, and rigid plastics.
- **High-Visibility Signs:** Used when a flawless, professional look is required without any trapped air pockets.

**What type of liquid should be used for a wet application?**

Several commercial application fluids are available through sign supply distributors. While Arlon recommends using professionally formulated application fluids, many shops choose to rely on homemade mixtures, typically consisting of water with a few drops of dish soap or baby shampoo.

The primary reason Arlon does not recommend homemade solutions is the wide variability among liquid detergents on the market. Many of these products contain additives that can compromise adhesive performance, leading to reduced bond strength, installation issues, or long-term failure.

 

 

**Common Uses**

- **Translucent Signs:** This method is required when working with translucent signs, as films like Series 2500 have a flat liner that does not use air channels, which could be visible when the sign is illuminated.
- **Frosted Vinyl:** Frosted films such as DPF 5200 also have a flat liner, and since it is a very thin material, application fluids are required when working with large panels.

**What is a dry application?**

It is an application method that does not require the use of fluids and can be carried out when a flat-liner film is small enough to be handled without difficulty, when an application table is used, or when the film has an air-release system such as X-Scape Technology or Flite Technology.

 

**Benefits of Using It**

- **Faster Application**: Removing application fluid takes time and multiple passes with a squeegee, so applying dry is much quicker and requires less effort.
- **Wider range Applications**: Dry application allows vinyl to be applied on multiple surfaces where liquids cannot be used, such as walls and porous surfaces.
- **Applications in Cooler Temperatures**: Removing fluids from the adhesive when working in low temperatures can be tedious and time-consuming. With dry application, you can achieve immediate adhesion, as long as you work within the recommended temperature range for the film.

**When to Use It?**

- Air-release technology: This application method is required when the film has air-release channels, because using any liquid with these types of films can cause the fluid to get trapped in the channels, leading to premature failure and adhesion problems.
- Textured surfaces: Dry application allows vinyl to be applied on multiple surfaces where liquids cannot be used, such as walls and porous surfaces.

**Common Uses**

- **Vehicle Wraps:** Films like SLX+ feature Flite Technology. This adhesive system has low initial tack and air channels, allowing the installer to reposition the film multiple times and achieve a completely bubble-free installation without the need of application fluids.
- **Wall Wraps:** When installing on walls, using application fluids is counterproductive because the surface will absorb some of the liquid and retain moisture. Films like V9500 have a strong adhesive for use on textured walls but also include air channels to facilitate installation on flat surfaces.

- [General Information](https://help.arlon.com/general-information?hsLang=en)
- [Product Specification](https://help.arlon.com/product-specification?hsLang=en)
- [Printing & Production](https://help.arlon.com/printing-production?hsLang=en)
- [Application](https://help.arlon.com/application?hsLang=en#main-content)

    - [Architectural](https://help.arlon.com/application?hsLang=en#architectural)
    - [Fleet & Commercial Vehicles](https://help.arlon.com/application?hsLang=en#fleet-commercial-vehicles)
    - [General Signage](https://help.arlon.com/application?hsLang=en#general-signage)
    - [Marine & Aircraft](https://help.arlon.com/application?hsLang=en#marine-aircraft)
- [Maintenance & Removal](https://help.arlon.com/maintenance-removal?hsLang=en)
- [Troubleshooting](https://help.arlon.com/troubleshooting?hsLang=en#main-content)

    - [Before Application](https://help.arlon.com/troubleshooting?hsLang=en#before-application)
    - [After Application](https://help.arlon.com/troubleshooting?hsLang=en#after-application)
- [Regulation & Compliance](https://help.arlon.com/regulation-compliance?hsLang=en)
- [Training & Certification](https://help.arlon.com/training-certification?hsLang=en)

[![Chill listening crop-3](https://help.arlon.com/hubfs/Arlon%20ANZ%20LP%20Images/arlon-logo.svg "Chill listening crop-3")](https://www.arlon.com)

<https://www.instagram.com/arlongraphics_us/> <https://www.linkedin.com/company/arlongraphics> <https://www.youtube.com/@ArlonGraphics> <https://www.facebook.com/ArlongraphicsUS/>

Copyright © 2026, Arlon Graphics