---
title: When Should You Conduct an Adhesion Test Before Full Production?
description: Compatibility Test
---

[Skip to content](https://help.arlon.com/when-should-you-conduct-an-adhesion-test-before-full-production#main-content)

<https://help.arlon.com/kb-tickets/new?hsLang=en>

Open main navigation

Close main navigation

- <https://help.arlon.com/kb-tickets/new>
- [arlon.com](mailto:techservice@arlon.com)

[arlon.com](mailto:techservice@arlon.com)

 HOW CAN WE HELP?

- There are no suggestions because the search field is empty.

1. [Arlon Help Center](https://help.arlon.com/?hsLang=en)
2. [Printing & Production](https://help.arlon.com/printing-production?hsLang=en)

# When Should You Conduct an Adhesion Test Before Full Production?

## Media Compatibility Test

An adhesion test is one of the most overlooked steps in graphics production. While it may add a small amount of time to the project, it can prevent costly reprints, installation failures, customer complaints, and warranty disputes. The reality is that not every surface behaves the way we expect, and assumptions can be expensive.

The good news is that most jobs don't require extensive testing. However, there are several situations where conducting a test before committing to full production is strongly recommended.

**1. When Working with an Unfamiliar Surface**

If you have never installed graphics on a particular substrate before, testing should be your first step.

Examples include:

- New wall systems
- Specialty plastics
- Powder-coated surfaces
- Composite panels
- Equipment and machinery
- Recently introduced building materials

A surface may appear similar to one you've previously wrapped but behave completely differently from an adhesion standpoint.

**2. When the Surface Has Been Painted**

Paint is one of the largest variables in graphics installation.

Questions to consider include:

- Has the paint fully cured?
- Was the surface properly prepared before painting?
- Does the paint contain silicone or stain-resistant additives?
- Will the paint remain bonded to the substrate during removal?

A simple adhesion test can reveal potential issues long before a full wall graphic or architectural wrap is produced.

**3. When Working with Textured Surfaces**

Textured walls are notorious for producing mixed results.

Examples include:

- EIFS
- Dryvit® systems
- Stucco
- Textured drywall
- Embossed plastics
- Concrete block

Even highly conformable films may struggle on aggressive textures. Testing allows installers to evaluate both initial adhesion and long-term performance expectations before moving forward.

**4. When Dealing with Low Surface Energy Plastics**

Materials such as polypropylene (PP) and polyethylene (PE) are known for being difficult to bond.

In many cases, a standard adhesive may appear acceptable immediately after installation but begin lifting days later.

Testing can help answer important questions such as:

- Is a high-tack adhesive required?
- Will primer be necessary?
- Is the substrate suitable for graphics at all?

A small sample can often save an entire production run.

**5. When the Surface May Contain Coatings or Contaminants**

Modern surfaces frequently contain treatments designed to resist contamination, but those same treatments can affect adhesion.

Examples include:

- Ceramic coatings
- Waxes
- Silicone treatments
- Easy-clean coatings
- Anti-graffiti coatings

Testing helps verify whether the cleaning process was successful and whether the adhesive can achieve an acceptable bond.

**6. Before Large or High-Value Projects**

The larger the project, the more important testing becomes.

Examples include:

- Fleet programs
- Architectural wraps
- Retail rollouts
- Event graphics
- School and university installations
- Corporate branding projects

Spending a few hours testing is far less expensive than reprinting and reinstalling thousands of square feet of graphics.

**What Makes a Good Adhesion Test?**

The goal is not simply to see whether the graphic sticks on day one.

A useful test should:

- Use the actual media and laminate planned for production.
- Be applied using the same installation methods that will be used on the final project.
- Remain in place long enough to evaluate bond development.
- Be checked for edge lifting, shrinkage, and removability.

In some cases, comparing multiple products side by side can help identify the best solution before production begins.

<iframe height="145" src="https://www.youtube.com/embed/659Xb_Z8Cm8?start=2&amp;feature=oembed" style="position: absolute; top: 0px; left: 0px; width: 100%; height: 100%; border: medium none currentcolor;" width="256" allowfullscreen data-mce-src="https://www.youtube.com/embed/659Xb_Z8Cm8?start=2&amp;feature=oembed" data-mce-style="position: absolute; top: 0px; left: 0px; width: 100%; height: 100%; border: medium none currentcolor;"></iframe>

<iframe width="256" height="145" src="https://www.youtube.com/embed/f5s8O6lcOAM?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen title="Testing an Interior Wall for Media Compatibility" style="position: absolute; top: 0px; left: 0px; width: 100%; height: 100%; border-width: medium; border-style: none; border-color: currentcolor; border-image: none;"></iframe>

 

- [General Information](https://help.arlon.com/general-information?hsLang=en)
- [Product Specification](https://help.arlon.com/product-specification?hsLang=en)
- [Printing & Production](https://help.arlon.com/printing-production?hsLang=en)
- [Application](https://help.arlon.com/application?hsLang=en#main-content)

    - [Architectural](https://help.arlon.com/application?hsLang=en#architectural)
    - [Fleet & Commercial Vehicles](https://help.arlon.com/application?hsLang=en#fleet-commercial-vehicles)
    - [General Signage](https://help.arlon.com/application?hsLang=en#general-signage)
    - [Marine & Aircraft](https://help.arlon.com/application?hsLang=en#marine-aircraft)
- [Maintenance & Removal](https://help.arlon.com/maintenance-removal?hsLang=en)
- [Troubleshooting](https://help.arlon.com/troubleshooting?hsLang=en#main-content)

    - [Before Application](https://help.arlon.com/troubleshooting?hsLang=en#before-application)
    - [After Application](https://help.arlon.com/troubleshooting?hsLang=en#after-application)
- [Regulation & Compliance](https://help.arlon.com/regulation-compliance?hsLang=en)
- [Training & Certification](https://help.arlon.com/training-certification?hsLang=en)

[![Chill listening crop-3](https://help.arlon.com/hubfs/Arlon%20ANZ%20LP%20Images/arlon-logo.svg "Chill listening crop-3")](https://www.arlon.com)

<https://www.instagram.com/arlongraphics_us/> <https://www.linkedin.com/company/arlongraphics> <https://www.youtube.com/@ArlonGraphics> <https://www.facebook.com/ArlongraphicsUS/>

Copyright © 2026, Arlon Graphics