---
title: Why Do SomeLow Energy Plastics Reject Graphics?
description: Low Energy Plastics
---

[Skip to content](https://help.arlon.com/why-do-somelow-energy-plastics-reject-graphics#main-content)

<https://help.arlon.com/kb-tickets/new?hsLang=en>

Open main navigation

Close main navigation

- <https://help.arlon.com/kb-tickets/new>
- [arlon.com](mailto:techservice@arlon.com)

[arlon.com](mailto:techservice@arlon.com)

 HOW CAN WE HELP?

- There are no suggestions because the search field is empty.

1. [Arlon Help Center](https://help.arlon.com/?hsLang=en)
2. [Product Specification](https://help.arlon.com/product-specification?hsLang=en)

# Why Do SomeLow Energy Plastics Reject Graphics?

## Low-Energy plastics

Some surfaces seem almost impossible to wrap successfully. A graphic may initially adhere well, only to begin lifting days or weeks later. In many cases, the problem is not the adhesive or the installation technique. The challenge lies in the surface itself.

Pressure-sensitive adhesives rely on a process called wet-out, where the adhesive flows into microscopic surface irregularities to establish contact. Some materials naturally resist this process because they have low surface energy.

Common low surface energy materials include polyethylene (PE), polypropylene (PP), certain automotive plastics, and some powder-coated surfaces.

These materials do not allow adhesives to spread and anchor as effectively as higher surface energy surfaces such as painted metal or glass.

Low surface energy challenges are particularly common in:

- Utility equipment
- Garbage containers
- Plastic storage systems
- Recreational vehicles
- Automotive trim pieces
- Industrial containers

A common mistake is assuming all plastics behave the same. In reality, two plastic surfaces may look identical while having dramatically different bonding characteristics.

Fortunately, specialized products are available for these situations. Films such as Arlon DPF **8000 Ultra Tack** and **DPF 8200 High Tack** are designed specifically to improve adhesion on difficult substrates.

Whenever installers encounter unfamiliar plastics, the safest approach is to identify the substrate, consult manufacturer recommendations, and perform adhesion testing before proceeding.

- [General Information](https://help.arlon.com/general-information?hsLang=en)
- [Product Specification](https://help.arlon.com/product-specification?hsLang=en)
- [Printing & Production](https://help.arlon.com/printing-production?hsLang=en)
- [Application](https://help.arlon.com/application?hsLang=en#main-content)

    - [Architectural](https://help.arlon.com/application?hsLang=en#architectural)
    - [Fleet & Commercial Vehicles](https://help.arlon.com/application?hsLang=en#fleet-commercial-vehicles)
    - [General Signage](https://help.arlon.com/application?hsLang=en#general-signage)
    - [Marine & Aircraft](https://help.arlon.com/application?hsLang=en#marine-aircraft)
- [Maintenance & Removal](https://help.arlon.com/maintenance-removal?hsLang=en)
- [Troubleshooting](https://help.arlon.com/troubleshooting?hsLang=en#main-content)

    - [Before Application](https://help.arlon.com/troubleshooting?hsLang=en#before-application)
    - [After Application](https://help.arlon.com/troubleshooting?hsLang=en#after-application)
- [Regulation & Compliance](https://help.arlon.com/regulation-compliance?hsLang=en)
- [Training & Certification](https://help.arlon.com/training-certification?hsLang=en)

[![Chill listening crop-3](https://help.arlon.com/hubfs/Arlon%20ANZ%20LP%20Images/arlon-logo.svg "Chill listening crop-3")](https://www.arlon.com)

<https://www.instagram.com/arlongraphics_us/> <https://www.linkedin.com/company/arlongraphics> <https://www.youtube.com/@ArlonGraphics> <https://www.facebook.com/ArlongraphicsUS/>

Copyright © 2026, Arlon Graphics